| PRODUCT LINE | Custom Burial Vault Coatings |
| PRODUCT NAME | #200 Opaque Yellow and #200 Transparent Yellow Sealer |
| MANUFACTURER | Viking Paints, Inc. |
| DESCRIPTION | Water reducible curing agent and sealer for burial vaults. |
| BASIC USES | Improves the hydration and strength of concrete. Seals the vault to improve the performance of finish coats and gives the vault a uniform base color for top coats. |
| PHYSICAL DATA |
Viscosity: 20 sec on a #3 zahn cup or 60 kreb units at 70°F
For reportable component information and percentages, refer to the Material Safety Data Sheet. |
| TECHNICAL DATA |
A wet film 3 mil thick on glass showed no sagging when scored and was dry in one hour. Water Resistance: Resists warm water drizzle after 4 hours. |
| SURFACE PREPARATION | No surface preparation is required, apply to the vault as soon as forms are removed. |
| MIXING INSTRUCTIONS | Use as supplied; Can be reduced up to 15% with water. |
| BAKING | N/A |
| APPLICATION | Can be applied by roller, siphon feed, gravity feed, or HVLP(high volume low pressure) spray equipment. If using airless spray equipment, tip size may need to be changed. |
| COVERAGE | 400-500 square feet/gallon |
| CURE SCHEDULE | Air dry: dry to touch 1 hour at 3 mils wet. Wait 24 hours if moving vault with slings. |
| COLORS | The yellow tint in #200 Opaque Yellow and #200 Transparent Yellow Sealer is for the purpose of identifying vaults that have been sealed and cured and are now ready for top coats. |
| AVAILABILITY | Viking Paints, Inc. 100 W. 78th St. Richfield, MN 55423 Phone: 612-866-1212 Fax: 612-866-5821 E-mail: info@vikingpaints.com Website: http://www.vikingpaints.com |
| WARRANTY | The manufacturer warrants all materials to be free from defects and will replace any material proven to be defective when applied according to our specifications -- at no cost -- within a period of one year. No other warranties are implied or intended. |
| CAUTIONS | Spray with ventilation and properly fitted N.I.O.S.H approved respirator. |
| THINNING INSTRUCTIONS | Should not be necessary, but can be thinned with water up to 15%. |
| LIMITATIONS | If the yellow sealer color will interfere with the topcoat color, vaults can be sealed with our top coat clear base (VPI-100-HVLP-CL-5). |
| RELATED PRODUCTS | #100 HVLP Clear Topcoat, #100 Gloss White, also Black, Gray, Blue, and Light Bronze Tinting Pastes and dry metallic powders. |
| TEST DATA | N/A |
| PACKAGING | Available in 5-gallon pails, and 55-gallon drums. |